Expandable Garden Hose
Drip Irrigation System Kit
Hard Garden Hose
Multiple Accessories
Drip sprinklers play an important role in plant irrigation as a component of a drip irrigation system that releases water to the plants. Regular cleaning and maintenance of the sprinkler head plays an important role in ensuring that the drip irrigation system continues to operate and extends its life. This post will share with you some knowledge about cleaning and maintaining drip irrigation sprinkler heads, which we hope will be helpful to you.
As mentioned in our previous article, drip irrigation sprinklers are prone to clogging for a variety of reasons, restricting the flow of water, which can affect your plants. Therefore, regular cleaning and maintenance of drip irrigation sprinklers can prevent these problems from occurring, thus ensuring healthy plant growth and the longevity of your drip irrigation system.
Step 1: Turn off the water source
Turn off the water to the drip irrigation system before you are ready to clean to avoid uneven water flow that can cause damage to plants and the drip irrigation system.
Step 2: Remove drip irrigation sprinklers
Use a small tool to remove the drip irrigation head from the hose, avoiding too much force on the drip head and causing leaks. If there are filters or other accessories in the drip head, remove them as well.
Step 3: Soak the drip irrigation sprinklers in a cleaning solution
Fill a container with water and add a suitable drip emitter cleaner, if not available you can use white vinegar. Soak the emitter in the cleaner for a while and shake the container slightly to see if the minerals in the emitter are dissolved.
Step 4: Clean drip irrigation sprinklers
After soaking the nozzle, use a small soft brush or toothbrush to clean all parts of the drip head and brush the filter as well as the fittings together. Try to clean in all directions to ensure that each part is cleaned in place, and when you have finished cleaning rinse the sprinkler head with running water and also check that the flow rate of the sprinkler head through the water source is normal.
Step 5: Reinstall and test drip heads
Reinsert the cleaned drip irrigation sprinkler head and fittings into the water line. Once all the installation is complete turn on the water supply to check that all the sprinkler heads are working properly and that there are no leaks etc. due to poor installation.
1. Regularly flush the system with water to prevent clogging
2. Regularly check the use of drip irrigation sprinklers for clogging or damage.
3. One of the most common situations of drip irrigation system is clogging of drip irrigation sprinklers, which is related to water quality, microorganisms and some impurities. Avoiding this situation can be avoided by purchasing the right filtration device.
The good operation of the drip irrigation system can not be separated from our daily maintenance, regular cleaning and maintenance of the sprinkler head, worse damage to the sprinkler head, in order to confirm that the plant can always get the right amount of water, to promote its healthy growth.
Drip irrigation system has been used by more and more families to irrigate garden plants, if you haven't tried drip sprinklers, you can browse the www.unionbooster.com to learn more about our drip irrigation system, which is easy to use and especially suitable for areas that need to save water. Products support customization, welcome to consult Nora:86 13958922796(WhatsApp).
